Raypak 106A Polymer Tube Bundle | 014874F
Raypak
SKU: 014874F
Raypak 014874F 106A Polymer Header Copper Tube Bundle Kit
The Raypak 014874F Tube Bundle Kit is a genuine replacement copper heat exchanger tube bundle for compatible Raypak 106A pool and spa heaters with polymer headers. This tube bundle is the heat-transfer component that allows pool or spa water to pass through the heater while absorbing heat from the burner system.
This replacement kit is commonly used when the original tube bundle is leaking, frozen, scaled, corroded, split, or damaged from poor water chemistry, low flow, overheating, or freeze conditions.
Product Features
- Genuine Raypak replacement heater part
- Manufacturer part number: 014874F
- Copper tube bundle for compatible Raypak 106A heaters
- Designed for Raypak 106 / 106A heater applications with polymer headers where specified
- Used in the heater heat exchanger assembly
- Common replacement for leaking, scaled, frozen, or damaged tube bundles
- Not interchangeable with the 156A tube bundle or commercial heater tube bundles
Kit Includes
- Tube bundle assembly
- O-ring gaskets
- Hex nuts
Product Details
| Brand | Raypak |
| Part Number | 014874F |
| Product Type | Tube Bundle / Heat Exchanger Tube Bundle Kit |
| Material | Copper tube bundle |
| Header Type | For compatible polymer header applications |
| Heater Series | Raypak 106 / 106A where specified |
| Application | Pool and spa heater heat exchanger repair |
| Common Use | Replacing a leaking or damaged tube bundle in compatible Raypak 106A heaters |
Compatibility
- Raypak Model 106A pool and spa heaters requiring part number 014874F
- Raypak 106 heater applications with polymer headers where 014874F is specified
- Residential Raypak 106A heater applications where the parts diagram calls for the 014874F copper tube bundle
- Replacement applications where the original tube bundle, heater model, and header style match Raypak 014874F specifications
Common Signs This Part May Need Replacement
- Water leaking from the heater heat exchanger area
- Visible cracks, splits, or freeze damage in the tube bundle
- Heater leaks only when the pump is running
- Water in the burner tray or combustion area
- Tube bundle is clogged or heavily scaled
- Heater has been damaged by improper winterization or freezing
- Heat exchanger damage is found during heater service or pressure testing
Important Notes
- This item is the tube bundle kit only.
- Polymer headers, complete heater, burner tray, gas valve, pressure switch, bypass assembly, sensors, control board, unions, and plumbing fittings are sold separately unless otherwise stated.
- Verify the exact Raypak heater model, BTU size, serial range, header material, and parts diagram before ordering.
- This part is for compatible 106A / 106 heater applications and is not the same as Raypak 014875F for 156A heaters.
- This tube bundle is not universal for all Raypak, Rheem, Ruud, 206A, 266A, 336A, 406A, commercial, ASME, cupro-nickel, or cast-iron header heaters.
- If the headers, bypass assembly, O-ring sealing surfaces, unitherm governor, pressure switch, or plumbing are damaged, replacing the tube bundle alone may not correct the issue.
- Heater repairs involving gas, combustion, electrical wiring, or heat exchanger replacement should be performed by a qualified pool heater technician.
Installation Notes
- Turn off electrical power to the heater before service.
- Shut off the gas supply before working inside the heater cabinet.
- Allow the heater to cool completely before removing any heat exchanger components.
- Relieve system pressure and drain the heater before removing the existing tube bundle.
- Inspect the polymer headers, bypass components, gaskets, O-ring grooves, and sealing surfaces before reassembly.
- Clean debris, scale, and old gasket material from mating surfaces before installing the new tube bundle.
- Install the included O-ring gaskets correctly and do not pinch, twist, or reuse damaged seals.
- Tighten hardware evenly according to the Raypak service instructions.
- After installation, pressure test and check for leaks before returning the heater to normal operation.
- Confirm proper water flow, gas operation, and heater safety controls before leaving the heater in service.
Related Products
- Raypak 014874F 106A Polymer Tube Bundle
- Raypak 014875F 156A Polymer Tube Bundle
- Raypak 005899F 106 / 156 Thermal Cut-Off Fuse Kit
- Raypak 014357 106A D-10 Residential Pool Heater Indoor Drafthood
Maintenance Tips
- Maintain proper pool water chemistry to help reduce scale, corrosion, and premature heat exchanger failure.
- Keep water flow within the heater manufacturer’s recommended range.
- Clean filters regularly so low flow does not overheat the heater.
- Winterize the heater properly in freeze-prone conditions.
- Address heater leaks quickly to help prevent burner tray, cabinet, and electrical damage.
- Inspect bypass parts, O-rings, and headers whenever the tube bundle is serviced.
- Have repeated heater overheating, sooting, scaling, or leak issues diagnosed before replacing multiple parts.
Questions about returns? View our return policy.
Hours Of Operation:
Monday - Friday: 7:00 am to 5:00 pm Phoenix Time
Saturday: 8:00 am to 2:00 pm
Sunday: Closed
- We do not ship on Saturday or Sunday.
- Orders totaling more than $300 will require signature confirmation upon delivery.
- We process and prepare orders for shipment within 1 business day. Please note that many other pool supply retailers require 3–5 days of handling time before shipping.
- Orders placed after 1:00 pm Phoenix Time may not be eligible for same-day shipment.
- Expedited shipping options are available at checkout.
Return Policy:
- Products that are received damaged will receive a refund in store credit.
- Most products are eligible for return within 30 days of receipt, except where noted below.
- To initiate a return, please complete an RMA form prior to sending your item back.
- Original shipping costs are non-refundable and will be deducted from the return credit.
- Items returned missing accessories or original packaging, or that are not in the same condition as received, may be subject to a restocking fee of up to 100% depending on the condition of the item upon return.
- Some returns will be charged an automatic 15% restocking fee.
- We are unable to issue refunds for items that have been damaged or rendered inoperable due to installer error.
- Please complete the return form to receive your RMA number and return shipping label.
- Chemical products are not eligible for return under any circumstances.
- The Pentair Colorsync 618031 is not eligible for return.
- Pool cleaners are not eligible for return.
- Opened seals and o-rings are not eligible for return.
- Capacitors are not eligible for return.
- Plastic popup tools are not eligible for return.
- Automation components and circuit boards are not eligible for return.
- If a light is returned due to a reported malfunction and is found to be fully operational upon testing, return shipping costs and a restocking fee will be deducted from the refund.
- Orders refused at the time of delivery will be subject to the original shipping costs being deducted from the refund.
Related Products