Hayward 1 & 1-1/2HP Impeller Max-Rated | SPX2610C
Hayward Products
SKU: SPX2610C
Hayward SPX2610C Pump Impeller (1 HP Full Rate / 1.5 HP Up Rate) – Super Pump, Super II (Select Models)
The Hayward SPX2610C is a genuine replacement pump impeller used in select Hayward pool pump wet ends. The impeller is the rotating component that creates water flow. Replacing a worn, cracked, or clogged impeller can restore proper circulation, pressure, and overall pump performance.
Key Features
- Part Number: SPX2610C
- Brand: Hayward
- Type: Pump impeller
- Common Rating Reference: 1 HP full-rated / 1.5 HP up-rated (application dependent)
- Designed for in-ground pool pump applications (model dependent)
- Helps restore flow when the original impeller is damaged or worn
Common Compatibility (Verify Before Ordering)
- Hayward Super Pump series (SP2600 / SP2600X families)
- Hayward Super II series (SP3000 / SP3000X families – model/year dependent)
- Also commonly referenced for select Hayward Max-Flo / Max-Flo XL style applications that use the same impeller configuration (verify by parts diagram)
Important: Impellers must match your pump’s exact model and total horsepower (THP/service factor). Always confirm fit using your pump model number and parts diagram before ordering.
Common Symptoms This Can Help Fix
- Reduced flow or weak return pressure (after confirming baskets and filter are clean)
- Debris blockage inside the impeller eye
- Cracked or worn impeller vanes
- Noise/vibration caused by impeller damage or imbalance
Installation Notes
- Disconnect power at the breaker before servicing the pump.
- Replace the shaft seal whenever the pump is opened for impeller service to help prevent leaks into the motor.
- Inspect the diffuser, housing gasket/O-rings, and seal plate surfaces while the wet end is open and replace worn seals.
- Prime the pump after reassembly and check closely for leaks during startup.
Related Products
- Hayward SPX2610C (This Impeller)
- Hayward Super Pump Parts
- Hayward Super II Pump Parts
- Hayward Pump Shaft Seals
- Hayward Pump O-Rings & Gaskets
- Hayward Super Pump Rebuild Kits
Maintenance Tips
- Keep skimmer and pump baskets clean to reduce debris reaching the impeller.
- Maintain proper water level to help prevent cavitation and premature impeller wear.
- Address suction-side air leaks promptly to improve priming and reduce pump strain.
- If flow drops suddenly, check baskets and filter first, then inspect the impeller for blockage if needed.
Questions about returns? View our return policy.
Hours Of Operation:
Monday - Friday: 7:00 am to 5:00 pm Phoenix Time
Saturday: 8:00 am to 2:00 pm
Sunday: Closed
- We do not ship on Saturday or Sunday.
- Orders totaling more than $300 will require signature confirmation upon delivery.
- We process and prepare orders for shipment within 1 business day. Please note that many other pool supply retailers require 3–5 days of handling time before shipping.
- Orders placed after 1:00 pm Phoenix Time may not be eligible for same-day shipment.
- Expedited shipping options are available at checkout.
Return Policy:
- Products that are received damaged will receive a refund in store credit.
- Most products are eligible for return within 30 days of receipt, except where noted below.
- To initiate a return, please complete an RMA form prior to sending your item back.
- Original shipping costs are non-refundable and will be deducted from the return credit.
- Items returned missing accessories or original packaging, or that are not in the same condition as received, may be subject to a restocking fee of up to 100% depending on the condition of the item upon return.
- Some returns will be charged an automatic 15% restocking fee.
- We are unable to issue refunds for items that have been damaged or rendered inoperable due to installer error.
- Please complete the return form to receive your RMA number and return shipping label.
- Chemical products are not eligible for return under any circumstances.
- The Pentair Colorsync 618031 is not eligible for return.
- Pool cleaners are not eligible for return.
- Opened seals and o-rings are not eligible for return.
- Capacitors are not eligible for return.
- Plastic popup tools are not eligible for return.
- Automation components and circuit boards are not eligible for return.
- If a light is returned due to a reported malfunction and is found to be fully operational upon testing, return shipping costs and a restocking fee will be deducted from the refund.
- Orders refused at the time of delivery will be subject to the original shipping costs being deducted from the refund.
Related Products
