Pentair A&A Low Profile 6 Port Ball Valve Rebuild Gear Kit 230062 524672
Pentair
SKU: 230062
Pentair 230062 A&A Low Profile 6 Port Ball Valve Rebuild Gear Kit
The Pentair 230062 A&A Low Profile 6 Port Ball Valve Rebuild Gear Kit is a replacement Kit D assembly for compatible Pentair In-Floor / A&A 6-port low-profile ball valve systems. This kit is used to rebuild key internal valve components that help the water-actuated valve cycle between cleaning zones.
This kit is commonly used when a 6-port low-profile ball valve is not rotating properly, skipping zones, sticking, losing efficiency, or showing wear in the internal cam, shaft, gear, impeller, or sealing components.
Product Features
- Genuine Pentair / A&A low-profile valve rebuild kit
- Manufacturer part number: 230062
- Old / alternate SKU: 524672
- Also identified as Kit D 6 Port Low Profile Ball Valve Kit
- Designed for compatible 6-port low-profile ball valve applications
- Used to rebuild worn internal valve components
- Helps restore proper water-actuated valve cycling between cleaning zones
- Common repair kit for Pentair In-Floor and legacy A&A in-floor cleaning systems
Kit Includes
- Center shaft
- Anti-friction washers, quantity 2
- Lower cam
- Gear assembly
- Top impeller
- Impeller shims, quantity 2
- Outer base O-ring
Product Details
| Brand | Pentair / A&A |
| Part Number | 230062 |
| Old SKU | 524672 |
| Product Type | Low Profile Ball Valve Rebuild Gear Kit |
| Valve Style | 6-Port Low Profile Ball Valve |
| Kit Reference | Kit D |
| Application | In-floor pool cleaning valve repair |
| Common Use | Rebuilding worn internal components in compatible 6-port low-profile ball valves |
| UPC | 818965012507 |
Compatibility
- Compatible Pentair In-Floor / A&A 6-port low-profile ball valve systems requiring part number 230062
- Low-profile actuator valve applications where the parts diagram calls for Kit D
- Legacy A&A valve applications using old SKU 524672
- In-floor cleaning systems where the original internal rebuild kit matches Pentair 230062 specifications
Common Signs This Kit May Be Needed
- In-floor cleaning heads do not cycle through zones correctly
- Valve sticks on one zone or skips zones
- Internal valve parts are worn, cracked, stripped, or damaged
- Valve cycles slowly or inconsistently
- Cleaning zones have uneven flow after filter and pump issues have been ruled out
- Gear assembly, cam, impeller, shaft, washers, or O-ring show visible wear
- Valve was opened for repair and internal components should be replaced together
Important Notes
- This item is the internal rebuild gear kit only.
- Valve lid, lower housing, band clamp, complete valve assembly, cleaning heads, tools, and plumbing fittings are sold separately unless otherwise stated.
- Verify your exact valve style, port count, and parts diagram before ordering.
- This kit is for compatible 6-port low-profile ball valve applications and is not universal for all Pentair, A&A, top-feed, T-valve, QuikClean, MagnaSweep, TurboClean, or Caretaker valves.
- If the valve housing, lid, band clamp, O-ring sealing surface, plumbing, or cleaning heads are damaged, replacing the internal rebuild kit alone may not restore proper system operation.
- Low pump flow, dirty filters, clogged lines, worn pop-up heads, or incorrect valve pressure can also affect in-floor cleaning performance.
Installation Notes
- Turn off the pool pump before servicing the valve.
- Relieve all system pressure before opening the valve.
- Note the valve orientation and existing internal part layout before disassembly.
- Remove debris, sand, scale, and broken plastic from the valve body before installing new parts.
- Inspect the valve lid, housing, band clamp, and sealing surfaces during service.
- Install the included parts in the correct order according to the valve service diagram.
- Replace worn O-rings and lubricate compatible seals only with pool-safe silicone lubricant when appropriate.
- Do not use petroleum-based lubricants on rubber seals.
- Do not force the gear assembly, cam, or impeller into place.
- After installation, restart the system and confirm the valve cycles through all cleaning zones properly.
Related Products
- Pentair 230062 A&A Low Profile 6 Port Ball Valve Rebuild Gear Kit
- A&A 230069 6-Port Low Profile T-Valve Kit 2"
- Pentair 230066 6 Port Low Profile Retro Kit
- Pentair 230043Z Lower Housing for 6-Port 2" Low Profile Valve
- Pentair / A&A 230045 Low Profile T-Valve Lid Assembly with O-Ring
- Pentair / A&A 230046Z Low Profile Valve O-Ring
- Pentair / A&A 230011Z Low Profile Stainless Steel Band Clamp
- Pentair 230080 2" Low Profile Actuator Valve T-Valve Assembly
- Pentair / A&A 230041 Low Profile 2" T-Valve Assembly, Snap-In Style
Maintenance Tips
- Keep the pool filter clean so the valve receives proper flow and pressure.
- Inspect internal valve components during routine in-floor cleaning system service.
- Remove sand, scale, and debris from the valve body before reassembly.
- Replace worn O-rings whenever the valve is opened.
- Do not force stuck internal components, as this can damage the valve body or gear assembly.
- Maintain proper water chemistry to help reduce scale buildup on valve parts and cleaning heads.
- Address inconsistent zone cycling early to help prevent additional internal valve damage.
Questions about returns? View our return policy.
Hours Of Operation:
Monday - Friday: 7:00 am to 5:00 pm Phoenix Time
Saturday: 8:00 am to 2:00 pm
Sunday: Closed
- We do not ship on Saturday or Sunday.
- Orders totaling more than $300 will require signature confirmation upon delivery.
- We process and prepare orders for shipment within 1 business day. Please note that many other pool supply retailers require 3–5 days of handling time before shipping.
- Orders placed after 1:00 pm Phoenix Time may not be eligible for same-day shipment.
- Expedited shipping options are available at checkout.
Return Policy:
- Products that are received damaged will receive a refund in store credit.
- Most products are eligible for return within 30 days of receipt, except where noted below.
- To initiate a return, please complete an RMA form prior to sending your item back.
- Original shipping costs are non-refundable and will be deducted from the return credit.
- Items returned missing accessories or original packaging, or that are not in the same condition as received, may be subject to a restocking fee of up to 100% depending on the condition of the item upon return.
- Some returns will be charged an automatic 15% restocking fee.
- We are unable to issue refunds for items that have been damaged or rendered inoperable due to installer error.
- Please complete the return form to receive your RMA number and return shipping label.
- Chemical products are not eligible for return under any circumstances.
- The Pentair Colorsync 618031 is not eligible for return.
- Pool cleaners are not eligible for return.
- Opened seals and o-rings are not eligible for return.
- Capacitors are not eligible for return.
- Plastic popup tools are not eligible for return.
- Automation components and circuit boards are not eligible for return.
- If a light is returned due to a reported malfunction and is found to be fully operational upon testing, return shipping costs and a restocking fee will be deducted from the refund.
- Orders refused at the time of delivery will be subject to the original shipping costs being deducted from the refund.
Related Products