Hayward Pool Cleaner Parts — Fix It, Don't Ditch It

If your Hayward pool cleaner has slowed down, stopped moving, or is just dragging itself around the shallow end like it gave up on life—don't write it off yet. The Hayward Poolvergnuegen line (including the popular AquaNaut and Navigator series) is built to be serviced, not tossed. Whether it's a worn gear assembly, a cracked body, or the whole lower half just calling it quits, most of these cleaners can be fully restored with a single OEM replacement part. At Aqua Pool Supply, we keep genuine Hayward suction cleaner parts in stock and priced well below what you'll typically find at the big box stores—so you can get your cleaner back in the water without the sticker shock of buying a brand new unit.

Why Hayward Suction Cleaners Are Worth Repairing

Hayward designed the Poolvergnuegen-style cleaners with modularity in mind. The gear assemblies, wheel hubs, body panels, and lower frames are all replaceable components—meaning when something wears out after a few seasons of use, you're not stuck buying a whole new machine. A complete replacement cleaner can easily run $400–$600+, while the specific part that actually failed might cost a fraction of that. We see pool owners make that unnecessary replacement call all the time, and it's almost always avoidable with the right information and the right parts supplier.

The key is knowing which part you actually need. Below we've broken down the most common Hayward suction cleaner repair parts we carry, what they fix, and what you'll save when you order from us.

Hayward 2-Wheel Suction Cleaner Head Only — PBS20JSTHBX

Sometimes it's not a single internal component that fails—it's the entire drive mechanism inside the cleaner head. When that happens, the Hayward PBS20JSTHBX Cleaner-Only Unit is the cleanest fix. This is a direct-fit replacement drive and gear assembly for the Poolvergnuegen 2-wheel suction cleaner—it restores full motion and cleaning capability without swapping the hose or any external hardware.

It includes the internal drive gears and all components needed to get your cleaner moving again, and it's engineered by Hayward specifically for suction-side pool environments. If your 2-wheel cleaner is spinning erratically, losing suction traction, or just won't move at all despite good water flow, this is almost always the culprit.

Regular Price: $249.99  |  Our Price: $220.00  |  Instant Savings: $29.99
→ Shop the Hayward PBS20JSTHBX Cleaner Head

Hayward PoolCleaner 2-Wheel Next Gen Conversion Kit — PVGXH792KIT

This is one of the most comprehensive repair options available for the 2-wheel Poolvergnuegen cleaner, and right now it's also one of our best deals. The PVGXH792KIT Next Gen Conversion Kit is a genuine OEM Hayward kit that rebuilds the lower frame of your 2-wheel cleaner using the same materials as the original factory parts.

What makes the "Next Gen" version an upgrade over the original is the switch from metal wheel screws to a bearing-based wheel hub system—which means smoother movement, less wear over time, and better overall performance. The kit also comes with suction inlets in three sizes so it can handle everything from fine debris to larger leaves without clogging. It includes the lower frame, all internal gears, both wheel hubs, bearings, and the three suction inlet sizes.

One thing to note: this kit does not include the front/back skirts, upper body assembly, tires, or the shroud—those are sold separately. It's best suited for cleaners under five years old, so if yours has been running since 2019 or later, this kit is a great fit.

Regular Price: $179.99  |  Our Price: $119.99  |  Instant Savings: $60.00
→ Shop the Hayward PVGXH792KIT 2-Wheel Conversion Kit

Hayward PoolCleaner 4-Wheel Next Gen Conversion Kit — PVGXH808KIT

Running the 4-wheel version of the Hayward AquaNaut or Poolvergnuegen cleaner? Same concept applies. The PVGXH808KIT Next Gen Conversion Kit is the lower body rebuild kit designed specifically for Hayward's 4-wheel suction cleaners, compatible with both the Poolvergnuegen and AquaNaut 4-wheel style units.

Like the 2-wheel version, this kit uses the upgraded bearing-based wheel system and genuine OEM components. It covers the core lower body rebuild and makes the process fairly straightforward—even if you've never cracked open a pool cleaner before. Some components from your existing unit may need to be transferred over, but Hayward designed the process to be manageable without a lot of specialized tools. Again, best compatibility is with cleaners under five years old.

We're currently low on these, so if your 4-wheel cleaner needs work before swim season really kicks in, don't sit on it.

Regular Price: $199.99  |  Our Price: $169.94  |  Instant Savings: $30.05
→ Shop the Hayward PVGXH808KIT 4-Wheel Conversion Kit

Hayward Poolvergnuegen White Upper Body Assembly with 3 Screws — 896584000-181

Cracked body shell? Sun damage, impact, or just years of UV exposure can take a toll on the upper body of your Poolvergnuegen cleaner. If the internal components are still working fine but the outer shell is the problem, there's no reason to replace the whole machine. The Hayward Upper Body Assembly (Part# 896584000-181) is a genuine OEM replacement that includes the three mounting screws needed for installation—no hunting for hardware separately.

It's a direct swap for the original upper housing and keeps everything properly sealed and protected. If your cleaner looks beat up on the outside but still has life left in the drive system, this is a cheap fix that can add years back onto the unit.

→ Check Current Price & Availability

OEM Parts Matter — Here's Why

When you're shopping for Hayward cleaner parts online, you'll find a mix of genuine OEM parts and aftermarket alternatives. We stock the genuine Hayward parts specifically because aftermarket components for suction cleaners often fit slightly off, wear faster, or cause compatibility issues with the existing hardware. When you buy OEM from Aqua Pool Supply, you're getting the same part that Hayward would ship from their own service center—just at a better price and typically with faster shipping since we keep it in stock.

Not sure which part is right for your specific model? Give us a call or stop by one of our locations in Phoenix, Chandler, Scottsdale, or Las Vegas. We can help you match the part to your cleaner's model number and get you sorted out quickly.