Superior Pump 99620 50 ft Reinforced Quick Disconnect Hose Kit

The Superior Pump 99620 Reinforced Quick Disconnect Hose Kit is a 1-1/2" x 50 ft lay-flat discharge hose kit designed for use with most sump, utility, drainage, and water-transfer pumps using compatible 1-1/4" or 1-1/2" discharge connections. The kit includes Cam-lock style fittings and adapters to help make setup faster than a basic hose-only discharge line.

This hose kit is commonly used for draining pool covers, removing standing water, transferring water away from equipment areas, and other temporary discharge applications where a reinforced lay-flat hose is preferred for storage and transport.

Product Features

• Genuine Superior Pump discharge hose kit
• Manufacturer part number: 99620
• 1-1/2" x 50 ft reinforced lay-flat discharge hose
• Quick-disconnect Cam-lock fittings included
• Designed for use with most sump and utility pumps
• Works with compatible 1-1/4" or 1-1/2" pump discharge connections
• Preassembled hose connection for faster setup
• Rolls flat for compact storage after use
• Expandable design includes fittings for connecting additional hose kits where appropriate
• Maximum working pressure: 116 PSI

Kit Includes

• 1-1/2" x 50 ft reinforced industrial lay-flat discharge hose
• 1-1/2" female Cam-lock fitting
• 1-1/2" hose barb
• 1-1/2" male Cam-lock x 1-1/2" hose barb adapter
• 1-1/2" male Cam-lock x 1-1/4" MPT adapter
• 1-1/4" FPT x 1-1/4" FPT or 1-1/2" MPT coupling
• Stainless steel hose clamp

Product Details

Common Uses

• Pool cover water removal
• Draining standing water from low areas
• Temporary pump discharge routing
• Sump and utility pump discharge applications
• Moving water away from patios, equipment pads, covers, basins, and drainage areas
• Replacing a worn, leaking, kinked, or undersized discharge hose

Compatibility

• Most compatible sump and utility pumps with 1-1/4" or 1-1/2" discharge connections
• Superior Pump applications requiring model 99620
• Temporary discharge setups requiring a 1-1/2" x 50 ft lay-flat hose kit
• Drainage applications where the included Cam-lock fittings and adapters match the pump outlet

Important Notes

• This item is the discharge hose kit only.
• Pump, check valve, extension hose, replacement pump adapters, electrical cords, and drainage fittings are sold separately unless otherwise stated.
• Verify pump discharge size before ordering.
• This is a lay-flat discharge hose and is not intended to remain pressurized as permanent rigid plumbing.
• Do not use this hose for drinking water, compressed air, fuel, chemicals, or applications outside the manufacturer’s specifications.
• Avoid sharp bends, kinks, vehicle traffic, sharp edges, and hot surfaces that can damage the hose.
• Drain and roll up the hose after use for best storage and longer service life.

Installation Notes

• Turn off and unplug the pump before connecting or removing discharge fittings.
• Match the included adapter to the pump’s discharge outlet size.
• Make sure threaded fittings are started straight to avoid cross-threading.
• Secure hose barb connections with the included stainless steel hose clamp where required.
• Confirm Cam-lock ears are fully seated and locked before operating the pump.
• Route the hose downhill or to an approved discharge location when possible.
• Keep the discharge end clear so water can flow freely.
• After use, allow the hose to drain before rolling it up for storage.

Related Products

• Superior Pump 99620 50 ft Reinforced Quick Disconnect Hose Kit

Maintenance Tips

• Inspect the hose for cuts, abrasions, punctures, or worn areas before each use.
• Check clamps, adapters, and Cam-lock fittings for tightness before pumping.
• Flush debris from the hose after dirty-water use.
• Let the hose dry before long-term storage when possible.
• Store the hose rolled flat in a cool, dry location away from sunlight and sharp tools.
• Replace the hose or fittings if leaks, cracks, damaged couplers, or weak spots are found.