Gladon Waveless Wall Foam 1/8" x 48" x 60' | AG60
Gladon
SKU: GLAAG60
Gladon AG60 – 1/8″ x 48″ x 60′ Above-Ground Pool Wall Foam
Product Overview
The Gladon AG60 wall foam is a closed-cell foam liner designed to install on the inside wall surface of an above-ground pool before the vinyl liner is installed. It provides a smooth protective barrier, helps prevent liner damage, and adds insulation to reduce heat loss.
Key Features
- 1/8″ thick closed-cell foam for added liner protection.
- 48″ height sized for standard above-ground pool wall heights.
- 60′ roll length suitable for many round and oval above-ground pools.
- Reduces abrasion and prevents the liner from contacting rust, corrosion, or rough wall surfaces.
- Acts as an insulating layer to help retain heat in the pool.
Technical Specifications
- Part Number: AG60
- Dimensions: 1/8″ thick × 48″ high × 60′ long
- Material: Closed-cell foam
- Application: Above-ground pool wall backing under vinyl liners
Applications & Compatibility
This wall foam is used when installing a new vinyl liner or replacing an existing one in an above-ground pool. It is compatible with metal, resin, and hybrid pool walls and helps extend liner life by providing a smooth, cushioned surface. Proper measurement of your pool circumference ensures correct coverage.
Installation Instructions
- Ensure the pool wall is clean, dry, and free of debris or protrusions.
- Apply spray adhesive or compatible wall-foam bonding tape to the wall surface.
- Unroll the foam along the wall, keeping seams tight and aligned.
- Trim excess foam as needed and make sure the top edge of the foam aligns with the liner track.
- Install the vinyl liner over the foam and smooth out any air pockets.
Troubleshooting
- Foam lifting from wall: Verify proper adhesive application and ensure the wall was clean and dry before installation.
- Visible bumps under the liner: Smooth the foam during installation and remove debris caught between foam and wall.
- Seams separating: Re-adhere edges using compatible adhesive or tape.
Maintenance Tip
Wall foam typically requires no ongoing maintenance after installation. When replacing a liner in the future, inspect the foam for wear, moisture damage, or compression and replace if necessary to maintain full liner protection.
Hours Of Operation:
Monday - Friday: 8:00 am to 4:00 pm Phoenix Time
Saturday and Sunday: Closed
- Orders costing more than $300 WILL be required to have signature confirmation upon delivery.
- Handling time is typically only 1 day.
- Any item ordered after 1pm Phoenix time, may not ship same-day.
- Call us if you require expedited shipping and we can give you quotes based on your needs.
Return Policy:
- All products, except as noted below, are eligible for return up to 30 days after receipt of item.
- For returns, an RMA form must be filled out HERE or customers can call for additional help.
- Shipping costs will be deducted from all returned items.
- Any item that is missing accessories, original packaging, or is not returned in the same condition that it was received in, may be subject to a re-stocking fee up to 100% based on the condition we receive it in.
- Items broken, damaged, or inoperable due to installer error will not be refunded.
- Fill out the return form or give us a call to obtain an RMA and return shipping label.
- There are no returns on the Pentair Colorsync 618031
- No returns on pool cleaners.
- No returns on opened seals and o-rings.
- No returns on capacitors.
- If a light is returned because it "doesn't work" and it tests fine, the cost to ship and a re-stocking fee will be deducted from the refund.
- All products denied upon arrival at customers house WILL be charged the cost to ship.
- Visa Gift Card Promotions: Gift cards are sent within 14 days of the order. When accepting the Visa Gift card, you agree that if your order is returned or refunded, this amount will be deducted from the refunded amount. All Visa Gift cards are sent via email in an E-Gift Card format and are non refundable.
Related Products
