Century Pool Pump Motor 1HP 1-Speed 1 Phase 60Hz 230/115V 56J Frame | B228SE
Century
SKU: CRMB228SE
Century B228SE – 1 HP Single-Speed Pool & Spa Motor (56J Frame)
Product Overview
The Century B228SE is a 1 HP up-rated, single-speed replacement motor designed for in-ground pool and spa pumps. It features a 56J C-face frame with threaded shaft, compatible with many pump housings and designed for reliable performance in pool environments.
Key Features
- 1 HP up-rated motor for robust pool pump applications.
- 56J frame size with C-face mounting for standard pump compatibility.
- Single-speed operation at 3,450 RPM for full-flow performance.
- 115/230 V dual voltage capability for flexible installation.
- Threaded stainless steel shaft for secure coupling to pump impeller.
Technical Specifications
- Part Number: B228SE
- Horsepower: 1.0 HP
- Speed: 3,450 RPM
- Voltage: 115/230 V, single phase
- Frame: 56J (C-face mount)
- Amps: ~12.0 A at 115 V / ~6.0 A at 230 V
- Shaft Type: Threaded (approx. 7/16-20 UNF-2A, RH) stainless steel
- Rotation: Counterclockwise looking at the shaft end (pump end rotation)
Applications & Compatibility
This motor is ideal for replacing worn or failed motors on pool and spa pumps that specify a 1 HP, 3450 RPM, 56J frame, C-face mount motor. Before purchasing, verify the existing motor’s horsepower, frame size, shaft type, voltage and rotation to ensure compatibility.
Installation Instructions
- Turn off all power supply to the pump and lock out the circuit.
- Drain or relieve pressure from the pump housing if needed, then remove the pump motor from the housing.
- Disconnect the old motor wiring and record connections or photograph wiring setup.
- Install the new B228SE motor onto the pump housing, align the C-face mount and secure bolts evenly.
- Wire the motor for the correct voltage (either 115 V or 230 V) following the label diagram on the motor housing.
- Reinstall any removed components, restore power, and test the motor operation—check for smooth start, correct rotation, no vibration, and proper flow.
Troubleshooting
- Motor fails to start: Confirm correct voltage wiring, check circuit breaker, inspect capacitor (if applicable) and ensure rotation direction is correct.
- Excessive vibration or noise: Verify motor mounting bolts are tight, shaft coupling alignment is correct, and pump impeller is free of obstruction.
- Low flow or high temperature: Ensure the pump housing is clear of debris, suction strainer is clean, and the motor is not overloaded.
Maintenance Tip
Keep the motor area free of debris, ensure ventilation is unobstructed, check coupling alignment annually, and replace any worn shaft seals or bearings during motor service. Doing so helps extend the life of the B228SE and your pump system.
Hours Of Operation:
Monday - Friday: 8:00 am to 4:00 pm Phoenix Time
Saturday and Sunday: Closed
- Orders costing more than $300 WILL be required to have signature confirmation upon delivery.
- Handling time is typically only 1 day.
- Any item ordered after 1pm Phoenix time, may not ship same-day.
- Call us if you require expedited shipping and we can give you quotes based on your needs.
Return Policy:
- All products, except as noted below, are eligible for return up to 30 days after receipt of item.
- For returns, an RMA form must be filled out HERE or customers can call for additional help.
- Shipping costs will be deducted from all returned items.
- Any item that is missing accessories, original packaging, or is not returned in the same condition that it was received in, may be subject to a re-stocking fee up to 100% based on the condition we receive it in.
- Items broken, damaged, or inoperable due to installer error will not be refunded.
- Fill out the return form or give us a call to obtain an RMA and return shipping label.
- There are no returns on the Pentair Colorsync 618031
- No returns on pool cleaners.
- No returns on opened seals and o-rings.
- No returns on capacitors.
- If a light is returned because it "doesn't work" and it tests fine, the cost to ship and a re-stocking fee will be deducted from the refund.
- All products denied upon arrival at customers house WILL be charged the cost to ship.
- Visa Gift Card Promotions: Gift cards are sent within 14 days of the order. When accepting the Visa Gift card, you agree that if your order is returned or refunded, this amount will be deducted from the refunded amount. All Visa Gift cards are sent via email in an E-Gift Card format and are non refundable.
Related Products
