Caretaker 99 Ultraflex/Ultraflex 2 Gauge Assy./Pressure Switch 4-7-2
- The Pressure Switch Assembly is designed to inform the Controller PCB about water circulation within the system.
- Wires from the Pressure Switch are connected to the Controller PCB in positions 3 and 4.
- When the pump operates, the wires on the Pressure Switch should display continuity when tested with an electrical meter, ensuring efficient water flow monitoring.
Installation & Troubleshooting:
The Pressure Switch is constructed to glue into a 2" x 3/4" tee. This tee is aligned with the return line, with the 3/4" section positioned vertically. For optimal setup, use a flexible conduit near the equipment. This will facilitate the wiring process from the Pressure Switch to the Controller PCB.
For effective troubleshooting, it's advised to test the pressure switch as the initial step, ensuring its proper functionality.