Hayward Super II Pump Impeller 3HP | SPX3026C
Hayward Products
SKU: SPX3026C
Hayward SPX3026C Impeller, 3 HP (Super II SP3000/SP3000X Series)
Hayward SPX3026C is a genuine replacement 3 HP pump impeller for the Hayward Super II pump family. The impeller is the rotating component that generates water flow; replacing a worn, cracked, or clogged impeller can restore proper circulation, pressure, and overall pump performance.
Key Features
- Part Number: SPX3026C
- Brand: Hayward
- Type: Pump impeller
- Horsepower Rating: 3 HP (application dependent)
- Pool Type: In-ground
- Designed for Hayward Super II wet ends using the 3 HP impeller configuration
Common Compatibility
Commonly used on Hayward Super II pump series:
- SP3000 Series (Super II)
- SP3000X Series (Super II)
- Often referenced as fitting “Super II 3 HP impeller (after 1989)” applications
Always confirm by your pump model number and/or parts diagram before ordering, especially when matching by horsepower.
Common Reasons to Replace the Impeller
- Reduced flow or weak return pressure (after filter/backwash issues are ruled out)
- Impeller damage from debris (rocks, sticks, acorns) or cavitation
- Cracks, chips, or worn vanes found during wet-end service
- Persistent priming problems caused by a severely clogged impeller (after suction air leaks are ruled out)
Installation Notes
- Disconnect power at the breaker before servicing any pump.
- Verify the impeller matches the pump’s exact model/HP configuration.
- Inspect the diffuser, seal plate, and housing O-rings during service and replace worn seals as needed.
- Replace the pump shaft seal during impeller service to help prevent leaks into the motor.
- Prime the pump properly after reassembly and check for leaks at startup.
Related Products
- Hayward SPX3026C (This Impeller)
- Hayward Super II (SP3000) Pump Parts
- Hayward Super II Shaft Seals
- Hayward Super II Diffusers
- Hayward Super II O-Rings & Gaskets
- Hayward Super II Rebuild Kits
Maintenance Tips
- Keep pump baskets and skimmer baskets clean to reduce debris reaching the impeller.
- Maintain proper water level to help prevent cavitation and impeller wear.
- Address suction-side air leaks promptly to protect the impeller and improve priming.
- If flow drops, check the filter and baskets first—then inspect the impeller for blockage if needed.
Questions about returns? View our return policy.
Hours Of Operation:
Monday - Friday: 7:00 am to 5:00 pm Phoenix Time
Saturday: 8:00 am to 2:00 pm
Sunday: Closed
- We do not ship on Saturday or Sunday.
- Orders totaling more than $300 will require signature confirmation upon delivery.
- We process and prepare orders for shipment within 1 business day. Please note that many other pool supply retailers require 3–5 days of handling time before shipping.
- Orders placed after 1:00 pm Phoenix Time may not be eligible for same-day shipment.
- Expedited shipping options are available at checkout.
Return Policy:
- Products that are received damaged will receive a refund in store credit.
- Most products are eligible for return within 30 days of receipt, except where noted below.
- To initiate a return, please complete an RMA form prior to sending your item back.
- Original shipping costs are non-refundable and will be deducted from the return credit.
- Items returned missing accessories or original packaging, or that are not in the same condition as received, may be subject to a restocking fee of up to 100% depending on the condition of the item upon return.
- Some returns will be charged an automatic 15% restocking fee.
- We are unable to issue refunds for items that have been damaged or rendered inoperable due to installer error.
- Please complete the return form to receive your RMA number and return shipping label.
- Chemical products are not eligible for return under any circumstances.
- The Pentair Colorsync 618031 is not eligible for return.
- Pool cleaners are not eligible for return.
- Opened seals and o-rings are not eligible for return.
- Capacitors are not eligible for return.
- Plastic popup tools are not eligible for return.
- Automation components and circuit boards are not eligible for return.
- If a light is returned due to a reported malfunction and is found to be fully operational upon testing, return shipping costs and a restocking fee will be deducted from the refund.
- Orders refused at the time of delivery will be subject to the original shipping costs being deducted from the refund.
Related Products
