Hayward Super II Pump Housing/Strainer 2" x 2" | SPX3020AA
Hayward Products
SKU: SPX3020AA
Hayward SPX3020AA Pump Housing & Strainer, 2" x 2" (Super II SP3000 / SP3000X)
The Hayward SPX3020AA is a genuine replacement pump housing and strainer body for Hayward Super II pool pumps. This is the main wet-end strainer/pot housing with 2" inlet and 2" discharge ports, used when the original housing is cracked, leaking, stripped, or damaged from freeze or overtightened fittings.
Key Features
- Part Number: SPX3020AA
- Brand: Hayward
- Type: Pump housing / strainer body (wet-end housing)
- Port Size: 2" intake x 2" discharge
- Designed for Hayward Super II SP3000 / SP3000X series pumps
- Includes drain plugs (as supplied)
- Restores proper sealing and structural integrity of the pump wet end
Common Compatibility
Commonly used on Hayward Super II pump models in the SP3000 and SP3000X families. Match by your pump model number and parts diagram to confirm this is the correct housing style for your wet end.
Common Reasons to Replace
- Housing crack or leak (often from freezing)
- Stripped or damaged threaded ports from overtightening fittings
- Persistent seepage from hairline cracks in the strainer pot
- Broken mounting ears or damaged sealing surfaces
Installation Notes
- Turn off power at the breaker and drain the pump before disassembly.
- Inspect and replace wear items during a housing swap (shaft seal, housing gaskets/O-rings, diffuser gasket).
- Verify your lid style before ordering parts (some Super II housings use different lid/knob designs).
- Use a pool-safe thread sealant on threaded fittings and avoid overtightening plastic ports.
- Prime the pump after reassembly and check closely for leaks during startup.
Related Products
- Hayward SPX3020AA
- Hayward Super II Pump Lids & Knobs
- Hayward Super II Strainer Baskets
- Hayward Super II Shaft Seals
- Hayward Super II O-Rings & Gaskets
- Pool-Safe Silicone O-Ring Lubricant
Maintenance Tips
- Winterize properly—freeze damage is a common cause of cracked pump housings.
- Keep lid seals clean and lightly lubricated to reduce suction-side air leaks and prime loss.
- Don’t overtighten threaded fittings; snug plus a small turn is usually enough with the right sealant.
- If you see repeat leaks, inspect the housing carefully for hairline cracks and warped sealing surfaces.
Questions about returns? View our return policy.
Hours Of Operation:
Monday - Friday: 7:00 am to 5:00 pm Phoenix Time
Saturday: 8:00 am to 2:00 pm
Sunday: Closed
- We do not ship on Saturday or Sunday.
- Orders totaling more than $300 will require signature confirmation upon delivery.
- We process and prepare orders for shipment within 1 business day. Please note that many other pool supply retailers require 3–5 days of handling time before shipping.
- Orders placed after 1:00 pm Phoenix Time may not be eligible for same-day shipment.
- Expedited shipping options are available at checkout.
Return Policy:
- Products that are received damaged will receive a refund in store credit.
- Most products are eligible for return within 30 days of receipt, except where noted below.
- To initiate a return, please complete an RMA form prior to sending your item back.
- Original shipping costs are non-refundable and will be deducted from the return credit.
- Items returned missing accessories or original packaging, or that are not in the same condition as received, may be subject to a restocking fee of up to 100% depending on the condition of the item upon return.
- Some returns will be charged an automatic 15% restocking fee.
- We are unable to issue refunds for items that have been damaged or rendered inoperable due to installer error.
- Please complete the return form to receive your RMA number and return shipping label.
- Chemical products are not eligible for return under any circumstances.
- The Pentair Colorsync 618031 is not eligible for return.
- Pool cleaners are not eligible for return.
- Opened seals and o-rings are not eligible for return.
- Capacitors are not eligible for return.
- Plastic popup tools are not eligible for return.
- Automation components and circuit boards are not eligible for return.
- If a light is returned due to a reported malfunction and is found to be fully operational upon testing, return shipping costs and a restocking fee will be deducted from the refund.
- Orders refused at the time of delivery will be subject to the original shipping costs being deducted from the refund.
Related Products
