Call For Best Price 1-888-484-0864

Pentair Max-E-Glas II / DuraGlas II Tank Body C176-59PZ

Pentair SKU: C176-59PZ

Pentair Max-E-Glas II / DuraGlas II Tank Body C176-59PZ

Pentair SKU: C176-59PZ
  • In stock, ready to ship
  • Inventory on the way
$224.94
Instant Savings: $75.05
/
Questions about returns? View our return policy.
Free US Shipping - Shipping Policy

Pentair C176-59PZ Tank Body Assembly for Max-E-Glas II and Dura-Glas II Pumps

The Pentair C176-59PZ Tank Body Assembly is a genuine replacement pump housing / strainer body assembly for compatible Sta-Rite Max-E-Glas® II and Dura-Glas® II pool pumps. This assembly forms the front strainer section of the pump and helps house the pump basket, trap cover, and suction-side water flow entering the pump.

This replacement tank body is commonly used when the original pump body is cracked, leaking, drawing air, damaged from freeze expansion, damaged from overtightened fittings, or worn from age and service. Replacing the tank body assembly can help restore proper suction, reduce air leaks, and improve pump priming performance.

Product Features

  • Genuine Pentair / Sta-Rite replacement part
  • Manufacturer part number: C176-59PZ
  • Tank body assembly for Max-E-Glas® II and Dura-Glas® II pumps
  • Forms the pump strainer / trap body section
  • Commonly listed as including the trap cover, cover O-ring, and strainer basket
  • Helps correct cracked pump body, air leak, suction leak, and prime-loss issues
  • Designed for pool and spa pump repair and rebuild applications

Product Details

Brand Pentair / Sta-Rite
Part Number C176-59PZ
Product Type Pump Tank Body Assembly / Strainer Body Assembly
Pump Series Max-E-Glas® II / Dura-Glas® II
Application Pool and spa pump housing repair
Common Included Components Tank body, trap cover, cover O-ring, and strainer basket

Compatibility

  • Sta-Rite Max-E-Glas® II pump applications requiring part number C176-59PZ
  • Sta-Rite Dura-Glas® II pump applications requiring part number C176-59PZ
  • Compatible pump models where the original parts diagram calls for C176-59P or C176-59PZ tank body assembly
  • Select P4R, P4RA, P4E, and P4EA series pump applications when matched by parts diagram

Common Signs This Part May Need Replacement

  • Pump body is cracked or visibly damaged
  • Pump loses prime or pulls air at the front housing
  • Water leaks from the tank body or strainer pot area
  • Threaded plumbing connections are cracked or stripped
  • Trap body was damaged by freeze expansion or overtightened fittings
  • Basket area, lid sealing surface, or housing is warped or worn

Important Notes

  • This item is the tank body assembly for compatible Max-E-Glas® II and Dura-Glas® II pumps.
  • Verify the exact included components before ordering, as packaging may vary by supplier or revision.
  • Motor, seal plate, diffuser, impeller, shaft seal, clamp, plumbing unions, drain plugs, and mounting hardware are sold separately unless otherwise stated.
  • Confirm your pump model, pump series, and existing part number before ordering.
  • This part is not universal for all Sta-Rite, Pentair, Dura-Glas, Max-E-Glas, or Max-E-Pro pumps.
  • If the seal plate, clamp, diffuser, impeller, or plumbing connections are also damaged, replacing the tank body alone may not fully correct leaks or priming issues.

Installation Notes

  • Turn off power to the pump at the breaker before servicing.
  • Relieve system pressure and drain the pump before disassembly.
  • Disconnect plumbing carefully to avoid damaging connected fittings or pipes.
  • Inspect the seal plate, clamp, diffuser, impeller, shaft seal, and O-rings during service.
  • Replace worn seals and O-rings whenever the pump is opened for repair.
  • Make sure the tank body seats evenly against the seal plate before tightening the clamp.
  • Do not overtighten threaded plumbing fittings into the new tank body.
  • Prime the pump completely before restarting to prevent dry-run damage.
  • After installation, check for air leaks, water leaks, abnormal noise, and proper pump prime.

Related Products

Maintenance Tips

  • Keep the pump basket clean to reduce strain on the pump and tank body.
  • Inspect the lid O-ring regularly and lubricate with pool-safe silicone lubricant when needed.
  • Do not run the pump dry, as heat buildup can damage pump internals and sealing surfaces.
  • Avoid overtightening plumbing fittings into plastic pump housings.
  • Address suction-side air leaks quickly to help prevent cavitation, prime loss, and pump damage.
  • Maintain proper water level and clear suction lines to protect the pump from running without adequate flow.
Questions about returns? View our return policy.

Hours Of Operation:

Monday - Friday: 7:00 am to 5:00 pm Phoenix Time

Saturday: 8:00 am to 2:00 pm

Sunday: Closed

  • We do not ship on Saturday or Sunday.
  • Orders totaling more than $300 will require signature confirmation upon delivery.
  • We process and prepare orders for shipment within 1 business day. Please note that many other pool supply retailers require 3–5 days of handling time before shipping.
  • Orders placed after 1:00 pm Phoenix Time may not be eligible for same-day shipment.
  • Expedited shipping options are available at checkout.

Return Policy:

  • Products that are received damaged will receive a refund in store credit.
  • Most products are eligible for return within 30 days of receipt, except where noted below.
  • To initiate a return, please complete an RMA form prior to sending your item back.
  • Original shipping costs are non-refundable and will be deducted from the return credit.
  • Items returned missing accessories or original packaging, or that are not in the same condition as received, may be subject to a restocking fee of up to 100% depending on the condition of the item upon return.
  • Some returns will be charged an automatic 15% restocking fee.
  • We are unable to issue refunds for items that have been damaged or rendered inoperable due to installer error.
  • Please complete the return form to receive your RMA number and return shipping label.
  • Chemical products are not eligible for return under any circumstances.
  • The Pentair Colorsync 618031 is not eligible for return.
  • Pool cleaners are not eligible for return.
  • Opened seals and o-rings are not eligible for return.
  • Capacitors are not eligible for return.
  • Plastic popup tools are not eligible for return.
  • Automation components and circuit boards are not eligible for return.
  • If a light is returned due to a reported malfunction and is found to be fully operational upon testing, return shipping costs and a restocking fee will be deducted from the refund.
  • Orders refused at the time of delivery will be subject to the original shipping costs being deducted from the refund.
Related Products