Raypak 336A/407A D-2 Power Vent, Indoor, IID Only, 240V, 39 lbs | 009833

Raypak SKU: RAY009833
Raypak 336A/407A D - 2 Power Vent, Indoor, IID Only, 240V, 39 lbs | 009833 - Heater Parts - img - 1

Raypak 336A/407A D-2 Power Vent, Indoor, IID Only, 240V, 39 lbs | 009833

Raypak SKU: RAY009833
  • In stock, ready to ship
  • Inventory on the way
Instant Savings: $100
/
🕒 Order within -- hrs and -- min  for same-day shipping!
Free US Shipping - Shipping Policy

Raypak 009833 D-2 Power Vent Kit – 240V – For Raypak Digital IID Heaters (336A–408A)

The Raypak 009833 is a factory D-2 mechanical draft (power vent) assembly designed for compatible Raypak Digital IID pool and spa heaters in the 336A–408A size range. It replaces the standard draft hood and provides fan-assisted exhaust to support approved venting configurations (including longer vent runs and sidewall venting when installed per the manufacturer’s instructions using appropriate Category III vent materials).

Key Features

  • Part Number: 009833
  • Type: D-2 Power Vent (Category III mechanical draft)
  • Voltage: 240V (verify your heater’s factory wiring and site power before ordering)
  • Draft safety: Draft proving switch verifies blower operation before heater operation
  • Design: Multi-position configuration supports common indoor/through-the-wall venting layouts when permitted
  • Exhaust connection: Typically 4" vent outlet (confirm your venting requirements and parts diagram)
  • Venting capability: Commonly listed for up to ~100 equivalent feet of vent length (per installation requirements)

Typical Compatibility

  • Raypak Digital IID heater families commonly including 336A / 337A / 406A / 407A / 408A
  • Important: Raypak parts can vary by revision. Always match by your heater model/serial and the correct parts diagram.

Common Reasons to Replace

  • Blower motor failure (noisy, seized, not starting, or intermittent operation)
  • Draft proving switch issues traced to the vent assembly
  • Corrosion or damage to the plenum/cabinet
  • Updating a compatible installation to a factory power-vent configuration (when allowed and supported by the heater documentation)

Installation Notes

  • Safety-critical component: Venting involves combustion exhaust. Installation should follow Raypak instructions and local code requirements.
  • Use approved venting: Category III venting typically requires specific sealed vent pipe/fittings suitable for positive pressure exhaust.
  • Verify clearances: Confirm termination location, air openings, and required clearances before installation.
  • Electrical verification: Confirm proper voltage, grounding, and wiring configuration for your heater and site.

Related Products

Installation & Maintenance Tips

  • Inspect the vent termination area periodically for nests, debris, or blockage that can affect draft.
  • Check wiring connections and the proving switch tubing/ports (if equipped) for corrosion or loose connections.
  • If the heater cycles off on draft-related faults, shut down and inspect venting layout, joints, and combustion air supply.
  • Maintain proper water flow and clean filtration—low flow and overheating can contribute to premature component wear.

Hours Of Operation: 

Monday - Friday: 8:00 am to 4:00 pm Phoenix Time

Saturday and Sunday: Closed

  • Orders costing more than  $300 WILL be required to have signature confirmation upon delivery.
  • Handling time is typically only 1 day.   
  • Any item ordered after 1pm Phoenix time, may not ship same-day.
  • Call us if you require expedited shipping and we can give you quotes based on your needs.

Return Policy:

  • All products, except as noted below, are eligible for return up to 30 days after receipt of item.
  • For returns, an RMA form must be filled out HERE or customers can call for additional help.
  • Shipping costs will be deducted from all returned items.
  • Any item that is missing accessories, original packaging, or is not returned in the same condition that it was received in, may be subject to a re-stocking fee up to 100% based on the condition we receive it in. 
  • Items broken, damaged, or inoperable due to installer error will not be refunded.
  • Fill out the return form or give us a call to obtain an RMA and return shipping label.
  • There are no returns on the Pentair Colorsync 618031
  • No returns on pool cleaners.
  • No returns on opened seals and o-rings.
  • No returns on capacitors.
  • If a light is returned because it "doesn't work" and it tests fine, the cost to ship and a re-stocking fee will be deducted from the refund.
  • All products denied upon arrival at customers house WILL be charged the cost to ship.
  • Visa Gift Card Promotions: Gift cards are sent within 14 days of the order. When accepting the Visa Gift card, you agree that if your order is returned or refunded, this amount will be deducted from the refunded amount. All Visa Gift cards are sent via email in an E-Gift Card format and are non refundable.
Related Products