Raypak 206A/267A D-2 Power Vent - Indoor, IID Only, 240V, 36 lbs | 009832
Raypak
SKU: RAY009832
Raypak 009832 D-2 Power Vent Kit (Mechanical Draft) – 120/240V – For Raypak Digital IID Heaters 206A–267A
The Raypak 009832 is a factory D-2 Power Vent (mechanical draft) kit designed for compatible Raypak Digital IID pool and spa heaters in the 206A–267A size range. It replaces the standard draft hood and provides fan-assisted exhaust for approved Category III positive-pressure venting, including through-the-wall and multi-position venting configurations when installed per Raypak instructions and local code.
Key Features
- Part Number: 009832
- Type: D-2 Power Vent (Category III mechanical draft / positive pressure)
- Voltage: Dual voltage 120/240 VAC (factory set for 240V; field-rewireable for 120V)
- Exhaust Connection: 4" vent outlet
- Multi-position venting: Supports common discharge orientations (including sidewall venting when permitted)
- Draft safety: Includes a draft-proving switch to verify blower operation before heater operation
- Post-purge control: Helps clear residual combustion gases after shutdown (control features vary by revision)
- Venting capability: Commonly rated for vent runs up to 100 equivalent feet when installed per the venting manual
Typical Compatibility
- Raypak Digital IID heaters in the 206A–267A size range (confirm exact model and revision)
- Important: Always verify fitment by your heater model/serial and the correct Raypak parts diagram before ordering.
Common Reasons to Replace
- Blower motor is noisy, seized, or will not start
- Draft-proving faults traced to the vent assembly
- Corrosion or physical damage to the plenum/cabinet
- Converting a compatible installation from a draft hood to a factory power-vent configuration (where allowed)
Installation Notes
- Combustion venting is safety-critical: Install per Raypak instructions and local codes. Professional installation is recommended.
- Use approved Category III vent materials: Positive-pressure venting typically requires sealed vent pipe/fittings rated for Cat III use.
- Verify electrical: Confirm site voltage and wiring configuration (factory set for 240V; field conversion to 120V requires proper rewiring).
- Confirm clearances: Follow required distances to openings, windows, and combustibles at the termination point.
Related Products
- Search: Raypak 009832
- Search: Raypak Power Vent Kits & Parts
- Search: Raypak Draft Proving / Pressure Switch
- Search: Raypak Blower Motor
- Search: Raypak 206A Parts
- Search: Raypak 267A Parts
- Search: 4" Category III Venting
Installation & Maintenance Tips
- Inspect the vent termination area regularly for nests, leaves, and debris that can restrict exhaust flow.
- Check the vent joints and supports periodically—positive-pressure systems must remain sealed and properly supported.
- If the heater locks out on draft-related faults, shut down and inspect the vent run, termination, and combustion air supply before restarting.
- Keep the equipment area clean and dry; corrosion and moisture intrusion can shorten blower and switch life.
- Maintain proper water flow and filtration—low flow and overheating can contribute to premature heater component wear.
Hours Of Operation:
Monday - Friday: 8:00 am to 4:00 pm Phoenix Time
Saturday and Sunday: Closed
- Orders costing more than $300 WILL be required to have signature confirmation upon delivery.
- Handling time is typically only 1 day.
- Any item ordered after 1pm Phoenix time, may not ship same-day.
- Call us if you require expedited shipping and we can give you quotes based on your needs.
Return Policy:
- All products, except as noted below, are eligible for return up to 30 days after receipt of item.
- For returns, an RMA form must be filled out HERE or customers can call for additional help.
- Shipping costs will be deducted from all returned items.
- Any item that is missing accessories, original packaging, or is not returned in the same condition that it was received in, may be subject to a re-stocking fee up to 100% based on the condition we receive it in.
- Items broken, damaged, or inoperable due to installer error will not be refunded.
- Fill out the return form or give us a call to obtain an RMA and return shipping label.
- There are no returns on the Pentair Colorsync 618031
- No returns on pool cleaners.
- No returns on opened seals and o-rings.
- No returns on capacitors.
- If a light is returned because it "doesn't work" and it tests fine, the cost to ship and a re-stocking fee will be deducted from the refund.
- All products denied upon arrival at customers house WILL be charged the cost to ship.
- Visa Gift Card Promotions: Gift cards are sent within 14 days of the order. When accepting the Visa Gift card, you agree that if your order is returned or refunded, this amount will be deducted from the refunded amount. All Visa Gift cards are sent via email in an E-Gift Card format and are non refundable.
Related Products
