Raypak 206A/267A D-2 Power Vent - Indoor, IID Only, 240V, 36 lbs | 009832
Raypak
SKU: 9832
Raypak 009832 D-2 Power Vent Kit (Mechanical Draft) – 120/240V – For Raypak Digital IID Heaters 206A–267A
The Raypak 009832 is a factory D-2 Power Vent (mechanical draft) kit designed for compatible Raypak Digital IID pool and spa heaters in the 206A–267A size range. It replaces the standard draft hood and provides fan-assisted exhaust for approved Category III positive-pressure venting, including through-the-wall and multi-position venting configurations when installed per Raypak instructions and local code.
Key Features
- Part Number: 009832
- Type: D-2 Power Vent (Category III mechanical draft / positive pressure)
- Voltage: Dual voltage 120/240 VAC (factory set for 240V; field-rewireable for 120V)
- Exhaust Connection: 4" vent outlet
- Multi-position venting: Supports common discharge orientations (including sidewall venting when permitted)
- Draft safety: Includes a draft-proving switch to verify blower operation before heater operation
- Post-purge control: Helps clear residual combustion gases after shutdown (control features vary by revision)
- Venting capability: Commonly rated for vent runs up to 100 equivalent feet when installed per the venting manual
Typical Compatibility
- Raypak Digital IID heaters in the 206A–267A size range (confirm exact model and revision)
- Important: Always verify fitment by your heater model/serial and the correct Raypak parts diagram before ordering.
Common Reasons to Replace
- Blower motor is noisy, seized, or will not start
- Draft-proving faults traced to the vent assembly
- Corrosion or physical damage to the plenum/cabinet
- Converting a compatible installation from a draft hood to a factory power-vent configuration (where allowed)
Installation Notes
- Combustion venting is safety-critical: Install per Raypak instructions and local codes. Professional installation is recommended.
- Use approved Category III vent materials: Positive-pressure venting typically requires sealed vent pipe/fittings rated for Cat III use.
- Verify electrical: Confirm site voltage and wiring configuration (factory set for 240V; field conversion to 120V requires proper rewiring).
- Confirm clearances: Follow required distances to openings, windows, and combustibles at the termination point.
Related Products
- Search: Raypak 009832
- Search: Raypak Power Vent Kits & Parts
- Search: Raypak Draft Proving / Pressure Switch
- Search: Raypak Blower Motor
- Search: Raypak 206A Parts
- Search: Raypak 267A Parts
- Search: 4" Category III Venting
Installation & Maintenance Tips
- Inspect the vent termination area regularly for nests, leaves, and debris that can restrict exhaust flow.
- Check the vent joints and supports periodically—positive-pressure systems must remain sealed and properly supported.
- If the heater locks out on draft-related faults, shut down and inspect the vent run, termination, and combustion air supply before restarting.
- Keep the equipment area clean and dry; corrosion and moisture intrusion can shorten blower and switch life.
- Maintain proper water flow and filtration—low flow and overheating can contribute to premature heater component wear.
Questions about returns? View our return policy.
Hours Of Operation:
Monday - Friday: 7:00 am to 5:00 pm Phoenix Time
Saturday: 8:00 am to 2:00 pm
Sunday: Closed
- We do not ship on Saturday or Sunday.
- Orders totaling more than $300 will require signature confirmation upon delivery.
- We process and prepare orders for shipment within 1 business day. Please note that many other pool supply retailers require 3–5 days of handling time before shipping.
- Orders placed after 1:00 pm Phoenix Time may not be eligible for same-day shipment.
- Expedited shipping options are available at checkout.
Return Policy:
- Products that are received damaged will receive a refund in store credit.
- Most products are eligible for return within 30 days of receipt, except where noted below.
- To initiate a return, please complete an RMA form prior to sending your item back.
- Original shipping costs are non-refundable and will be deducted from the return credit.
- Items returned missing accessories or original packaging, or that are not in the same condition as received, may be subject to a restocking fee of up to 100% depending on the condition of the item upon return.
- Some returns will be charged an automatic 15% restocking fee.
- We are unable to issue refunds for items that have been damaged or rendered inoperable due to installer error.
- Please complete the return form to receive your RMA number and return shipping label.
- Chemical products are not eligible for return under any circumstances.
- The Pentair Colorsync 618031 is not eligible for return.
- Pool cleaners are not eligible for return.
- Opened seals and o-rings are not eligible for return.
- Capacitors are not eligible for return.
- Plastic popup tools are not eligible for return.
- Automation components and circuit boards are not eligible for return.
- If a light is returned due to a reported malfunction and is found to be fully operational upon testing, return shipping costs and a restocking fee will be deducted from the refund.
- Orders refused at the time of delivery will be subject to the original shipping costs being deducted from the refund.
Related Products
