{"product_id":"aladdinpsrpumpsealpsr100aeqpsr100","title":"Aladdin PSR Pump Seal | PSR-100","description":"\u003cdiv\u003e\n  \u003ch2\u003eAladdin PSR-100 Pump Shaft Seal\u003c\/h2\u003e\n\n  \u003cp\u003eThe Aladdin PSR-100 is an individually boxed mechanical pump shaft seal designed for compatible pool and spa pump applications. This two-piece replacement seal helps prevent water from leaking between the pump wet end and motor shaft. It is commonly replaced during motor changes, pump rebuilds, and repairs involving water leakage near the seal plate or motor.\u003c\/p\u003e\n\n  \u003ch3\u003eKey Features\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eAladdin replacement mechanical pump shaft seal\u003c\/li\u003e\n    \u003cli\u003ePart number: PSR-100\u003c\/li\u003e\n    \u003cli\u003eTwo-piece seal assembly\u003c\/li\u003e\n    \u003cli\u003eDesigned for compatible 5\/8-inch shaft seal applications\u003c\/li\u003e\n    \u003cli\u003eIndividually boxed for clean storage and handling\u003c\/li\u003e\n    \u003cli\u003eHelps prevent water intrusion that can damage pump motor bearings\u003c\/li\u003e\n    \u003cli\u003eRecommended whenever a compatible pump motor is replaced\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eCompatible Pump Applications\u003c\/h3\u003e\n  \u003cp\u003eThe PSR-100 is used with select pump models and configurations, including compatible:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eSta-Rite Dura-Glas pumps\u003c\/li\u003e\n    \u003cli\u003eSta-Rite Max-E-Glas pumps\u003c\/li\u003e\n    \u003cli\u003eSta-Rite PLBC booster pumps\u003c\/li\u003e\n    \u003cli\u003eAnthony AJ pumps\u003c\/li\u003e\n    \u003cli\u003eBaker Hydro pump applications\u003c\/li\u003e\n    \u003cli\u003ePac Fab and Purex pump applications\u003c\/li\u003e\n    \u003cli\u003eUltra-Flow and WhisperFlo pump applications\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eCross-Reference Part Numbers\u003c\/h3\u003e\n  \u003cp\u003eThe Aladdin PSR-100 may replace or cross-reference the following part numbers in compatible applications:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e004547\u003c\/li\u003e\n    \u003cli\u003e04547\u003c\/li\u003e\n    \u003cli\u003e07-1733\u003c\/li\u003e\n    \u003cli\u003eP-28280\u003c\/li\u003e\n    \u003cli\u003eP28280\u003c\/li\u003e\n    \u003cli\u003eU109-093\u003c\/li\u003e\n    \u003cli\u003eU109-6A\u003c\/li\u003e\n    \u003cli\u003eU109-93SS\u003c\/li\u003e\n    \u003cli\u003ePS-100\u003c\/li\u003e\n    \u003cli\u003ePS100\u003c\/li\u003e\n    \u003cli\u003eAS-100\u003c\/li\u003e\n    \u003cli\u003eAS100\u003c\/li\u003e\n    \u003cli\u003eVG-100\u003c\/li\u003e\n    \u003cli\u003eVG100\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eImportant Compatibility Notes\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eConfirm the pump model, seal plate configuration, and original seal part number before ordering.\u003c\/li\u003e\n    \u003cli\u003eDo not select a shaft seal using the motor model alone. The correct seal is determined by the pump wet end and seal plate design.\u003c\/li\u003e\n    \u003cli\u003eSome pump series were produced with different seals depending on the manufacturing year or pump configuration.\u003c\/li\u003e\n    \u003cli\u003eThis listing includes the pump shaft seal only. O-rings, gaskets, and other wet-end components are sold separately unless specifically stated otherwise.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eTurn off electrical power and relieve system pressure before servicing the pump.\u003c\/li\u003e\n    \u003cli\u003eClean the seal plate and mating surfaces before installing the new seal.\u003c\/li\u003e\n    \u003cli\u003eAvoid touching the polished ceramic and carbon seal faces with bare hands.\u003c\/li\u003e\n    \u003cli\u003eDo not apply lubricant to the polished mechanical seal faces unless specifically directed by the pump manufacturer.\u003c\/li\u003e\n    \u003cli\u003eAfter reassembly, prime the pump and inspect the seal plate and motor area for leaks.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eRelated Product\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003ca href=\"https:\/\/aquapoolsupply.com\/products\/aladdinmagiclubeiisiliconelubricant1oztube650aeq650\"\u003eAladdin Magic Lube II Silicone Lubricant, 1 oz Tube | 650\u003c\/a\u003e — for compatible O-rings and gaskets during pump service.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eMaintenance Tips\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eReplace the shaft seal whenever the pump motor is replaced to reduce the risk of leaks and premature motor failure.\u003c\/li\u003e\n    \u003cli\u003eInspect the seal plate for cracks, corrosion, or worn sealing surfaces before installing a new seal.\u003c\/li\u003e\n    \u003cli\u003eReplace flattened, brittle, or damaged O-rings while the pump is disassembled.\u003c\/li\u003e\n    \u003cli\u003eAddress water dripping near the motor promptly, as continued operation can damage bearings and electrical components.\u003c\/li\u003e\n    \u003cli\u003eNever run the pump dry. Dry operation can overheat and damage a mechanical shaft seal.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Aladdin","offers":[{"title":"Default Title","offer_id":52966967673148,"sku":"PSR-100","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/3280\/9276\/files\/aladdin-psr-pump-seal-psr-100-pump-parts-1803760.jpg?v=1780519026","url":"https:\/\/aquapoolsupply.com\/products\/aladdinpsrpumpsealpsr100aeqpsr100","provider":"Aqua Pool Supply","version":"1.0","type":"link"}