{"title":"Pentair Dyna-Pro \u0026 Dyna-Pro E Pump Replacement Parts","description":"\u003cp\u003ePentair Dyna-Pro \u0026amp; Dyna-Pro E Pump parts, matched to the diagram. Click any number on the exploded view to see the part, price and stock. Leaking pump? It is usually the shaft seal or an o-ring. Losing prime? Start with the lid o-ring. Not sure what you have? Call us or bring the part into any of our Phoenix, Scottsdale, Chandler or Las Vegas stores and we'll match it.\u003c\/p\u003e","products":[{"product_id":"pentairmultiportvalvedrainplugworingu178920pzpenu178920pz","title":"Pentair Multiport Valve Drain Plug w\/ O-Ring | U178-920PZ","description":"\u003cdiv\u003e\n\u003ch1\u003ePentair Multiport Valve Drain Plug with O‑Ring | U178‑920PZ\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003ePentair U178‑920PZ Multiport Valve Drain Plug\u003c\/strong\u003e is a genuine OEM replacement designed for use with Pentair multiport valves. Equipped with a durable O‑ring seal, this drain plug ensures a water-tight fit inside the valve’s drain port, allowing for easy drainage during winterizing or maintenance without leaks.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Pentair Part:\u003c\/strong\u003e Ensures compatibility and long-lasting performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure O‑Ring Seal:\u003c\/strong\u003e Prevents leaks and ensures a tight fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Drainage:\u003c\/strong\u003e Allows simple removal for draining and reinstallation when refilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e Made from chemical‑resistant polymer for reliability in pool environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e U178‑920PZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent:\u003c\/strong\u003e Drain plug with integrated O‑ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High‑quality, corrosion‑resistant plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Fits Pentair multiport valves for cartridge and D.E. filter systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKeep your Pentair multiport valve sealed and leak-free during both operation and winterization with the \u003cstrong\u003eU178‑920PZ Multiport Valve Drain Plug with O‑Ring\u003c\/strong\u003e. A simple, reliable solution for proper pool maintenance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eSKU: U178-920PZ\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":51576143905084,"sku":"U178-920PZ","price":8.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/3280\/9276\/files\/pentair-multiport-valve-drain-plug-w-o-ring-u178-920pz-pentair-744404.jpg?v=1750391776"},{"product_id":"pentairmaxeprotraplidassembly173070111spen173070111s","title":"Pentair Max-E-Pro Trap Lid Assembly | 17307-0111S","description":"\u003cdiv\u003e\n\u003ch2\u003ePentair 17307-0111S – Trap Cover Assembly\u003c\/h2\u003e\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe Pentair 17307-0111S is a genuine replacement trap cover assembly designed for select Pentair and Sta-Rite in-ground pool pumps. It restores proper sealing and visibility of the pump strainer basket and helps maintain strong, reliable suction.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOEM replacement kit including clear trap lid, locking ring and O-ring.\u003c\/li\u003e\n\u003cli\u003eTransparent cover allows easy viewing of debris in the pump basket.\u003c\/li\u003e\n\u003cli\u003eDurable, chemical-resistant construction for long service life.\u003c\/li\u003e\n\u003cli\u003ePrecision-fit components help maintain proper pump priming and prevent air leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: 17307-0111S\u003c\/li\u003e\n\u003cli\u003eIncludes: Trap lid, locking ring, O-ring\u003c\/li\u003e\n\u003cli\u003eApplication: Pump strainer cover assembly\u003c\/li\u003e\n\u003cli\u003eFits: Select Pentair and Sta-Rite Max-E-Pro, IntelliPro VS 3050, Dyna-Pro and similar models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cp\u003eThis trap cover assembly is used on premium in-ground pumps when the original lid cracks, leaks, loses clarity or the seal no longer maintains proper vacuum. It is commonly used on Max-E-Pro, IntelliPro and Dyna-Pro series pumps. Always confirm your pump model to ensure compatibility.\u003c\/p\u003e\n\u003ch3\u003eInstallation Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShut off pump power and relieve any pressure in the system.\u003c\/li\u003e\n\u003cli\u003eRemove the existing lid and locking ring; clean the sealing surface thoroughly.\u003c\/li\u003e\n\u003cli\u003eInspect the pump basket and replace if damaged.\u003c\/li\u003e\n\u003cli\u003eInstall the new O-ring, place the clear lid on the pump housing and secure with the locking ring.\u003c\/li\u003e\n\u003cli\u003eHand-tighten evenly and restore system power. Check for air leaks or water seepage during startup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir entering pump:\u003c\/strong\u003e Verify the O-ring is clean, lubricated and seated correctly, and ensure the ring is tightened evenly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater leak at lid:\u003c\/strong\u003e Clean the sealing surface and inspect O-ring for wear or debris.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid cloudy or cracked:\u003c\/strong\u003e Replace immediately to maintain visibility and ensure proper sealing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaintenance Tip\u003c\/h3\u003e\n\u003cp\u003eInspect the lid and O-ring at the start of every season. Apply a silicone-based lubricant to the O-ring and replace the cover assembly when cracks, clouding or sealing issues appear. This helps maintain pump efficiency and protects the system from air intrusion.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":52335997583676,"sku":"17307-0111S","price":56.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/3280\/9276\/files\/pentair-max-e-pro-trap-lid-assembly-17307-0111s-pump-parts-1725209.jpg?v=1763068590"},{"product_id":"pentairdynaglasmax5hpimpellerc105236ppenc105236p","title":"Pentair Dyna-Glas\/Max .5HP Impeller | C105-236P","description":"\u003cdiv\u003e\n\u003ch1\u003ePentair C105-236P Impeller\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e C105-236P\u003c\/p\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThis is a genuine Pentair replacement impeller designed to fit select Sta-Rite Dyna-Glas, Dyna-Max, Dyna-Pro and Dyna-Pro E pumps. It restores the proper flow dynamics and back-prime performance of the pump by replacing worn or damaged impeller vanes.\u003c\/p\u003e\n\u003ch2\u003eCompatibility \u0026amp; Fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFits Sta-Rite Dyna-Glas \/ Dyna-Max series pumps (1 HP models) and Sta-Rite Dyna-Pro \/ Dyna-Pro E models (½ HP units) specified for this impeller. \u003c\/li\u003e\n\u003cli\u003eOEM part that corresponds to earlier Sta-Rite catalog number 5057-08. \u003c\/li\u003e\n\u003cli\u003eUsed when impeller vanes are damaged, cracked, worn down, or when pump fails to prime or loses suction performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures \u0026amp; Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOEM-grade fit and durability from Pentair.\u003c\/li\u003e\n\u003cli\u003eTypically used in applications where the impeller OD measures approximately 4″ for this pump series. \u003c\/li\u003e\n\u003cli\u003eUPC: 788379734169. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eBefore replacing the impeller, shut power to the pump, drain and remove the pump housing and diffuser. Remove the old impeller by holding the motor shaft and unscrewing the unit (threaded mount). Clean the shaft and threads, install the new C105-236P impeller snugly, reassemble the diffuser and pump housing, then restore power and verify priming and flow are correct.\u003c\/p\u003e\n\u003ch2\u003eMaintenance Tip\u003c\/h2\u003e\n\u003cp\u003eInspect the pump’s impeller annually or if you notice reduced flow, increased run time, or frequent loss of prime. Replacing the impeller with the correct part like the C105-236P ensures optimal performance and extends the life of the pump system.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":52336010232124,"sku":"C105-236P","price":39.94,"currency_code":"USD","in_stock":true}]},{"product_id":"pentairdynaglasimpeller2hpfullratec105236pdapenc105236pda","title":"Pentair Dyna-Glas Impeller 2HP Full Rate | C105-236PDA","description":"\u003cdiv\u003e\n  \u003ch2\u003ePentair \/ Sta-Rite 2 HP Full-Rated Impeller for Dyna-Glas, Dyna-Max, Dyna-Pro, and Dyna-Wave Pumps | C105-236PDA\u003c\/h2\u003e\n\n  \u003cp\u003e\n    The Pentair \/ Sta-Rite C105-236PDA is a genuine replacement \u003cstrong\u003eclosed-face impeller\u003c\/strong\u003e designed for select\n    Sta-Rite pump wet ends that use a \u003cstrong\u003e2.0 HP full-rated\u003c\/strong\u003e impeller. Replacing a worn, cracked, or damaged\n    impeller can restore proper flow and pressure when your pump has reduced performance (after confirming baskets, filter,\n    and plumbing are clear).\n  \u003c\/p\u003e\n\n  \u003ch3\u003eCompatibility\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSta-Rite Dyna-Glas \/ Dyna-Max (2 HP):\u003c\/strong\u003e commonly used on models including MPEA6G-155L, MPRA6G-155L, MPR6AG-155LC, MPEA6YG-175L, MPEA6YG-175LS\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSta-Rite Dyna-Pro \/ Dyna-Pro E (2 HP):\u003c\/strong\u003e commonly used on models including MPEA6G-207L, MPE6F-207L, MPEA6YG-207L, MPE6YF-207L, MPRA6G-207\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSta-Rite Dyna-Wave series:\u003c\/strong\u003e where C105-236PDA is specified on the parts list\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSta-Rite Dyna-Jet TPE series (2 HP):\u003c\/strong\u003e commonly used on models including TPEAG-167LS and TPEAYG-167LS\u003c\/li\u003e\n    \u003cli\u003e\n\u003cem\u003eTip:\u003c\/em\u003e Always confirm by your pump model and exploded parts diagram. Sta-Rite wet ends can vary by revision.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eKey Features\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003e2.0 HP full-rated impeller\u003c\/strong\u003e for compatible Sta-Rite pump wet ends\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eClosed-face design\u003c\/strong\u003e for efficient water movement and stable pressure\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDirect replacement\u003c\/strong\u003e to restore performance after impeller wear, cracks, or debris damage\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDesigned for square-flange motors\u003c\/strong\u003e with a threaded shaft used on these pump assemblies\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eSpecifications\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pentair \/ Sta-Rite\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e C105-236PDA\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCatalog \/ Cross Reference:\u003c\/strong\u003e 5057-08C\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHorsepower Rating:\u003c\/strong\u003e 2.0 HP (Full Rated)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Pump impeller\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eImpeller Style:\u003c\/strong\u003e Closed-face\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold individually\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eCommon Signs You Need a New Impeller\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eNoticeably reduced flow or pressure even with a clean filter and baskets\u003c\/li\u003e\n    \u003cli\u003eGrinding\/rattling from the wet end (debris damage or broken vanes)\u003c\/li\u003e\n    \u003cli\u003eVisible cracks, chips, or worn vanes on the impeller\u003c\/li\u003e\n    \u003cli\u003ePoor priming or performance that returns briefly after cleaning, then drops again\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eTurn off power at the breaker and relieve system pressure before opening the pump.\u003c\/li\u003e\n    \u003cli\u003eInspect the \u003cstrong\u003ediffuser\u003c\/strong\u003e and \u003cstrong\u003eseal plate\u003c\/strong\u003e for cracks\/warping while the pump is apart.\u003c\/li\u003e\n    \u003cli\u003eWhen replacing an impeller, it’s smart to replace the \u003cstrong\u003eshaft seal\u003c\/strong\u003e at the same time to prevent leaks.\u003c\/li\u003e\n    \u003cli\u003eClean debris from the volute and diffuser passages before reassembly.\u003c\/li\u003e\n    \u003cli\u003eAfter reassembly, confirm the motor spins freely by hand and check for leaks on startup.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eRelated Products\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/aquapoolsupply.com\/pages\/search-results-page?q=C105-236PDA\"\u003eSearch Aqua Pool Supply for C105-236PDA\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/aquapoolsupply.com\/pages\/search-results-page?q=5057-08C\"\u003eSearch Aqua Pool Supply for 5057-08C\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/aquapoolsupply.com\/pages\/search-results-page?q=U109-433SS\"\u003eSta-Rite \/ Pentair Mechanical Shaft Seal (U109-433SS)\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/aquapoolsupply.com\/pages\/search-results-page?q=C1-216P\"\u003eSta-Rite Dura-Glas \/ Max-E-Glas Diffuser (C1-216P)\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/aquapoolsupply.com\/pages\/search-results-page?q=C119-37S\"\u003eSta-Rite Tank Body V-Clamp (C119-37S)\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/aquapoolsupply.com\/pages\/search-results-page?q=seal%20plate%20o-ring%20sta-rite\"\u003eSta-Rite seal plate O-rings and gaskets\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/aquapoolsupply.com\/pages\/search-results-page?q=pump%20rebuild%20kit%20sta-rite\"\u003eSta-Rite pump rebuild kits\u003c\/a\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eMaintenance Tips\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eKeep skimmer and pump baskets clean—debris that reaches the wet end is a common cause of impeller damage.\u003c\/li\u003e\n    \u003cli\u003eIf flow drops suddenly, check for blockages before assuming the impeller has failed (baskets, filter, suction line, and return restrictions).\u003c\/li\u003e\n    \u003cli\u003eFix suction-side air leaks early; running with air can reduce performance and increase seal wear.\u003c\/li\u003e\n    \u003cli\u003eWinterize properly in freeze-prone areas—ice expansion can crack housings and damage internal wet-end parts.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"Pentair","offers":[{"title":"Default Title","offer_id":52589953614140,"sku":"C105-236PDA","price":44.99,"currency_code":"USD","in_stock":true}]},{"product_id":"pentair-whisperfloxf-trap-cover-o-ring-35505-1440z","title":"Pentair WhisperFloXF Trap Cover O-Ring 35505-1440Z","description":"\u003cdiv\u003e\n  \u003ch2\u003ePentair 35505-1440Z Lid\/Locking Ring O-Ring\u003c\/h2\u003e\n\n  \u003cp\u003eThe Pentair 35505-1440Z is a replacement lid\/locking ring O-ring used on select Pentair and Sta-Rite pool pump strainer assemblies. This O-ring helps create a tight seal between the pump lid and pump trap body, helping prevent air leaks, water leaks, and loss of prime.\u003c\/p\u003e\n\n  \u003ch3\u003eProduct Features\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eGenuine Pentair replacement O-ring\u003c\/li\u003e\n    \u003cli\u003ePart number: 35505-1440Z\u003c\/li\u003e\n    \u003cli\u003eAlso commonly listed as 35505-1440\u003c\/li\u003e\n    \u003cli\u003eUsed for the pump trap cover, lid, or locking ring seal\u003c\/li\u003e\n    \u003cli\u003eApproximate dimensions: 6.90 inch outer diameter x 6.35 inch inner diameter\u003c\/li\u003e\n    \u003cli\u003eHelps restore a proper seal on compatible pump strainer lids\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eCommon Compatibility\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003ePentair IntelliFloXF variable speed pumps\u003c\/li\u003e\n    \u003cli\u003ePentair WhisperFloXF pumps\u003c\/li\u003e\n    \u003cli\u003eSta-Rite IntelliProXF variable speed pumps\u003c\/li\u003e\n    \u003cli\u003eSta-Rite Max-E-Pro series pumps\u003c\/li\u003e\n    \u003cli\u003eSta-Rite Max-E-Pro XF series pumps\u003c\/li\u003e\n    \u003cli\u003eSta-Rite Dyna-Pro and Dyna-Pro E pumps\u003c\/li\u003e\n    \u003cli\u003eSelect Dyna-Wave pump applications\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n  \u003cp\u003eReplace this O-ring if the pump lid is difficult to seal, the pump is pulling air, the lid area is leaking, the O-ring is stretched, flattened, cracked, brittle, or no longer sits properly in the groove. A worn lid O-ring can cause priming problems and reduced pump performance.\u003c\/p\u003e\n\n  \u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eTurn off power to the pump before servicing.\u003c\/li\u003e\n    \u003cli\u003eRelieve pressure from the system before removing the pump lid.\u003c\/li\u003e\n    \u003cli\u003eRemove the old O-ring and clean the lid and O-ring groove thoroughly.\u003c\/li\u003e\n    \u003cli\u003eApply a light coat of pool-safe silicone lubricant before installation.\u003c\/li\u003e\n    \u003cli\u003eSeat the O-ring evenly in the groove before tightening the lid.\u003c\/li\u003e\n    \u003cli\u003eHand-tighten only unless your pump manual states otherwise.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eRelated Products\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/aquapoolsupply.com\/products\/pentairxfseriesstrainerbasket400007zpen400007z\"\u003ePentair XF Series Strainer Basket | 400007Z\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/aquapoolsupply.com\/products\/aladdinmagiclubeiisiliconelubricant1oztube650aeq650\"\u003eAladdin Magic Lube II Silicone Lubricant, 1 oz Tube | 650\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/aquapoolsupply.com\/collections\/pool-pump-parts\"\u003eShop Pool Pump Parts\u003c\/a\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eMaintenance Tips\u003c\/h3\u003e\n  \u003cp\u003eInspect the pump lid O-ring whenever cleaning the pump basket. Keep the O-ring clean and lightly lubricated to help prevent sticking, twisting, and premature wear. Do not use petroleum-based lubricants, as they can damage rubber seals. Always verify your pump model and existing part number before ordering replacement parts.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":53017872073020,"sku":"35505-1440Z","price":18.89,"currency_code":"USD","in_stock":true}]},{"product_id":"pentair-whisperfloxf-impeller-screw-37337-6080z","title":"Pentair WhisperFloXF Impeller Screw 37337-6080Z","description":"\u003cdiv\u003e\n  \u003ch2\u003ePentair 37337-6080Z Impeller Lock Screw\u003c\/h2\u003e\n\n  \u003cp\u003eThe Pentair 37337-6080Z is a genuine replacement impeller lock screw used on select Pentair and Sta-Rite pool pumps. This screw helps secure the impeller during pump operation and is commonly replaced when servicing the impeller, diffuser, seal plate, shaft seal, or pump wet end.\u003c\/p\u003e\n\n  \u003ch3\u003eProduct Features\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eGenuine Pentair replacement part\u003c\/li\u003e\n    \u003cli\u003ePart number: 37337-6080Z\u003c\/li\u003e\n    \u003cli\u003eAlso commonly listed as 37337-6080\u003c\/li\u003e\n    \u003cli\u003eImpeller lock screw for select Pentair and Sta-Rite pump models\u003c\/li\u003e\n    \u003cli\u003eHelps secure the impeller in place during pump operation\u003c\/li\u003e\n    \u003cli\u003eCommonly used during pump seal, impeller, or wet-end service\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eCommon Compatibility\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003ePentair IntelliFloXF variable speed pumps\u003c\/li\u003e\n    \u003cli\u003ePentair WhisperFloXF pumps\u003c\/li\u003e\n    \u003cli\u003ePentair WhisperFloXF VS pumps\u003c\/li\u003e\n    \u003cli\u003eSta-Rite IntelliProXF variable speed pumps\u003c\/li\u003e\n    \u003cli\u003eSta-Rite IntelliPro variable speed pumps\u003c\/li\u003e\n    \u003cli\u003eSta-Rite Max-E-ProXF pumps\u003c\/li\u003e\n    \u003cli\u003eSta-Rite Max-E-Pro series pumps\u003c\/li\u003e\n    \u003cli\u003eSta-Rite Max-E-Glas II pumps\u003c\/li\u003e\n    \u003cli\u003eSta-Rite Dura-Glas II pumps\u003c\/li\u003e\n    \u003cli\u003eSta-Rite Dyna-Glas and Dyna-Max pumps\u003c\/li\u003e\n    \u003cli\u003eSta-Rite Dyna-Pro and Dyna-Pro E pumps\u003c\/li\u003e\n    \u003cli\u003eSelect Sta-Rite Dyna-Jet TPE series pumps\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n  \u003cp\u003eReplace the impeller lock screw if the original screw is missing, stripped, corroded, damaged, or removed during pump service. A worn or damaged impeller screw may prevent the impeller from being properly secured and should not be reused if the threads or head are compromised.\u003c\/p\u003e\n\n  \u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eTurn off power to the pump at the breaker before servicing.\u003c\/li\u003e\n    \u003cli\u003eRelieve system pressure and close valves before opening the pump.\u003c\/li\u003e\n    \u003cli\u003eInspect the impeller, shaft seal, diffuser, and O-rings while the pump is apart.\u003c\/li\u003e\n    \u003cli\u003eMany pump impeller lock screws use reverse threads, so check the pump service manual before removal or installation.\u003c\/li\u003e\n    \u003cli\u003eDo not force the screw if it does not thread smoothly.\u003c\/li\u003e\n    \u003cli\u003eReplace any damaged sealing parts before reassembling the pump wet end.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eRelated Products\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/aquapoolsupply.com\/search?q=Pentair+350336Z\"\u003ePentair 350336Z Diffuser O-Ring\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/aquapoolsupply.com\/search?q=Pentair+400006Z\"\u003ePentair 400006Z Lid and Locking Ring Assembly\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/aquapoolsupply.com\/products\/pentairxfseriesstrainerbasket400007zpen400007z\"\u003ePentair XF Series Strainer Basket | 400007Z\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/aquapoolsupply.com\/search?q=Pentair+XF+pump+parts\"\u003eShop Pentair XF Pump Parts\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/aquapoolsupply.com\/collections\/pool-pump-parts\"\u003eShop Pool Pump Parts\u003c\/a\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eMaintenance Tips\u003c\/h3\u003e\n  \u003cp\u003eWhen servicing the pump wet end, inspect all related components before reassembly. Replacing worn O-rings, seals, and damaged hardware during the same repair can help prevent leaks, priming issues, and repeat service. Always verify your pump model and parts diagram before ordering replacement parts.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":53017877512508,"sku":"37337-6080Z","price":17.94,"currency_code":"USD","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/3280\/9276\/collections\/pentair-dyna-pro-exploded-view.png?v=1790356402","url":"https:\/\/aquapoolsupply.com\/collections\/parts-list-pentair-dyna-pro.oembed","provider":"Aqua Pool Supply","version":"1.0","type":"link"}